Call us(469) 310-8192

Manta Bath › Blog ›

Where to put a grab bar in a walk-in shower

Put it where your hand already reaches. In most walk-in showers that means one bar by the entry and one along the long wall. Public buildings mount horizontal bars 33 to 36 inches above the floor, a good starting point at home, but in your own shower the right height is the one that fits you.

Walk-in shower with green tile and brass fixtures, a Manta project in Dallas–Fort Worth
A Manta shower with brass fixtures. A grab bar can match the finish.

The usual spots

  • By the entry. A vertical bar on the wall next to the opening gives you something to hold as you step in and out.
  • Along the long wall. A horizontal bar on the back wall helps when you turn, wash or stand still with your eyes closed.
  • Near the controls. If you reach for the valve while the water warms up, a bar nearby helps.
  • By a seat, if you have one. A bar beside the seat helps you sit down and stand up.

Before we mount anything, we check that the glass door opens past the bar and that the bar doesn't sit where you'll hang a towel.

The numbers public buildings use

Homes don't have to follow these rules, but they come from years of testing and make a sensible starting point:

WhatStandard for public buildings
Height of a horizontal bar, to the top33 to 36 in above the floor
Bar diameter (round bars)1 1/4 to 2 in
Space between the bar and the wall1 1/2 in
Force the bar and its mounting must hold250 lb, from any direction

The best way to set the height at home: stand in the shower as you normally do and mark where your hand rests comfortably. We mount it there.

Anchoring matters more than the bar

A grab bar is only as strong as what it's screwed into. Tile and drywall alone won't hold it. Ours are anchored into the wall framing. When the old tub comes out, the wall is open, which is the easiest time to add wood backing where you might want a bar later.

Two things that aren't grab bars: towel bars, which aren't built to hold your weight, and suction-cup handles, which can let go.

It doesn't have to look clinical

Grab bars come in the same finishes as faucets and shower heads: chrome, brushed nickel, black and brass. Matched to the fixtures, a bar reads as part of the shower.

Every Manta conversion includes a grab bar placed where you want it. Show us at the free visit and we'll mark the spot with you.

Common questions about grab bars

How high should a shower grab bar be?

Public buildings use 33 to 36 inches from the floor to the top of a horizontal bar. At home, mark where your hand rests comfortably while you stand in the shower and mount it there.

Vertical or horizontal?

Both have a job. A vertical bar by the entry helps you step in and out; a horizontal bar on the long wall helps while you stand and turn.

Can I add more grab bars later?

Yes, as long as there is framing or backing behind the tile. Adding backing while the wall is open, during the conversion, makes that easy.

Can a grab bar be attached to tile only?

No. It has to be anchored into the framing or into backing behind the wall, so it holds your weight.

Sources: 2013 FSORAG section 609, grab bars (height, diameter, spacing, strength) · GrabBars.com: grab bar height

← More answers · Walk-in shower installation · What goes into the cost

Get your written price

Leave your name and number. We’ll call you to set up a free visit.

Free in-home estimate
Financing available
5-year workmanship warranty

No obligation. By tapping “Please call me” you agree we may call or text this number about your bathroom. We never share your number.

Rather call now?(469) 310-8192

Call nowPlease call me