Call us(469) 310-8192

Manta Bath › Blog ›

Walk-in shower size: will one fit where your tub is?

Almost always, yes. A standard tub is 60 inches long and 30 to 32 inches wide. A walk-in shower built in that space keeps about the same size, which is roughly twice the minimum the building code sets for a shower.

A 60 by 30 inch tub space compared with the code minimum shower Top view. The tub space is 60 inches long and 30 inches deep, 1,800 square inches. The smallest shower the code allows, 30 by 30 inches or 900 square inches, fills half of it. Code minimum 30 × 30 in = 900 sq in Your tub space 60 × 30 in = 1,800 sq in 60 in, wall to wall 30 in Front: low step-in and glass door
Top view of a standard tub space. The smallest shower the code allows takes up half of it.

Standard tub sizes

Most tubs in Dallas–Fort Worth homes are alcove tubs: walls on three sides and a front side you step over.

TubLengthWidthHeight of the side
Standard alcove tub60 in30–32 in14–16 in
All tub types (range)55–72 in27–36 in14–20 in

Shorter tubs, around 54 inches, show up in some older and smaller bathrooms. That 14 to 16-inch side is the wall you climb over today. A walk-in shower replaces it with a curb a few inches high.

What the building code requires

Most cities in Dallas–Fort Worth build to the International Residential Code (IRC), with their own local changes. These are its rules for shower size, next to what a standard tub space gives you:

RuleIRC minimum60 × 30 in tub space
Floor area inside the shower900 sq inAbout 1,800 sq in
Narrowest side, inside the finished walls30 in, or 25 in if the shower has at least 1,300 sq inAbout 30 in
Height that area must keep70 in above the drainThe full wall height
Clear floor in front of the shower opening24 inWe measure it at the visit

New tile adds a little thickness to the back wall, so a 30-inch tub space can end up just under 30 inches deep. It still passes: the code allows 25 inches when the shower has 1,300 square inches or more, and a 60-inch shower has well over that. Your city's permit office has the final word on local rules.

What we measure at the visit

  • Wall to wall. The length of the tub space, usually 60 inches.
  • Back wall to the front of the tub. This becomes the depth of the new shower.
  • Where the drain and the valve are. Keeping them in place keeps the job simple. Moving them is a plumbing change.
  • The floor in front of the tub. The space you'll step into, and whether the floor is level.
  • What's behind the tub, once it comes out. Old leaks can leave damage, and we show you before we fix it.

Standard installs are done in 24 hours. Moving the drain, other plumbing changes or water damage can add time, and we tell you before we start.

Doors for a 60-inch opening

The front of the shower is as wide as the tub was, so the glass covers about 60 inches. The door style you pick decides how you step in: a sliding door keeps everything inside the shower's footprint, and a hinged door gives a wider opening. We check that a hinged door clears the toilet and the vanity before you choose it.

When the shower can be bigger

If a linen closet or unused space sits next to the tub, the shower can sometimes grow into it. That means moving a wall and usually some plumbing, so it's a larger job than a standard conversion, with its own written price. We can look at it during the same visit.

Want a quick check first? Try the walk-in shower fit calculator.

Not sure about your bathroom? We measure it at the free visit. It takes less than an hour, and you get your design and one written price that doesn't expire.

Common questions about shower size

Will a walk-in shower fit where my tub is?

Almost always. A 60 by 30-inch tub space has about 1,800 square inches, twice the 900 the building code requires for a shower.

Is a 30-inch-deep shower too tight?

It meets the code, which asks for 30 inches, or 25 inches when the shower has at least 1,300 square inches. Because the shower is 60 inches long, there is room to move along it.

Can a 54-inch tub become a walk-in shower?

Usually, yes. A 54 by 30-inch space is 1,620 square inches, well above the 900-square-inch minimum. We confirm it when we measure.

Do you have to move the drain?

Not always. Many conversions keep the drain where the tub's drain was. If it has to move, that's a plumbing change, and we tell you before we start.

Sources: This Old House: standard bathtub sizes · Building Code Trainer: IRC minimum shower size and clearances (P2708.1, R307.1) · Jaspector: IRC 2021 P2708.1 minimum shower size

← More answers · Walk-in shower installation · What goes into the cost

Get your written price

Leave your name and number. We’ll call you to set up a free visit.

Free in-home estimate
Financing available
5-year workmanship warranty

No obligation. By tapping “Please call me” you agree we may call or text this number about your bathroom. We never share your number.

Rather call now?(469) 310-8192

Call nowPlease call me